* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
VCP & 6x UARTs, 1x Softserial_Tx option (TX2 pad, INAV) 10x PWM outputs(S1~S9, LED) 2x I2C 3x ADC (voltage, current, RSSI) 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) Built in inverter on UART2-RX for SBUS input PPM/UART Shared: UART2-RX
1x SH1.0_6pin connector (4V5/G/TX4/RX4/DA2/CL2) for GPS/compass 1x SH1.0_6pin connector for external USB and buzzer
DJI FPV OSD: any spare UART FrskyOSD: any spare UART
Power: 6~30V DC IN (2~6S LiPo) 132A high-precision Current Sense (Scale 250) PDB/Current sense resistor: 60A continuous, 132A burst. BEC 5V 2A for FC & Peripherals BEC Vx 5A for servos, 5V/ 6V option BEC 8V 1.5A for VTX and camera LDO 3.3V 200mA Battery Voltage Sensor: 1k:10k
FC Firmware: INAV Target: MATEKF405SE ArduPilot hwdef: MATEKF405WING Physical Dimensions: 44 x 29 x 10 mm Mounting: 25 x 25mm, Φ2mm Weight: 20g w/ bottom plate and USB/buzzer adapter
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-4 of 4|
Show Original
A part of the QA has been auto-translated.
0
Q:
why at me in iNAV the barometer is defined, as SPL 06 and at all as DPS310?
why at me in iNAV the barometer is defined, as SPL 06 and at all as DPS310?
Matek has been using new barometer SPL06 in new batch of production since Dec,2021 for some Flight controllers. SPL06 and DPS310 perform same, SPL06 can work with SPL06 driver or DPS310 driver in INAV. But for this FC he change was not advertised. You can check on the board since SPL06 has silver metal shell, DPS310 has black Nylon shell.
Also please note that INAV2.5.x downloaded from configurator doesn’t support new barometer DPS310. If you have not yet done it use INAV firmware 2.6.x and new configurator. Hope it helps you
Matek has been using new barometer SPL06 in new batch of production since Dec,2021 for some Flight controllers. SPL06 and DPS310 perform same, SPL06 can work with SPL06 driver or DPS310 driver in INAV. But for this FC he change was not advertised. You can check on the board since SPL06 has silver metal shell, DPS310 has black Nylon shell.
Also please note that INAV2.5.x downloaded from configurator doesn’t support new barometer DPS310. If you have not yet done it use INAV firmware 2.6.x and new configurator. Hope it helps you
Answered by Lorenzo on 04/02/2022Helpful (0)
0
Q:
The Scaling of the current sensor is NOT 250 ... does somebody have a REAL Value?
The Scaling of the current sensor is NOT 250 ... does somebody have a REAL Value?