* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
I just ordered the second one. I've made the maiden run of my first one that arrived last Thursday. I worked flawlessly with my Tamiya sport tunned motor on my Sakura f109. I juiced three three 5000mah (25c 40c and 50c) lipo packs back to back on an asphalt track with a 86/26 ratio and it didn't break a sweat. it wasn't even warm during the entire run. I have got it because of the cut off and it worked just fine. I definitely recommend it as a go to brushed esc to any rwd and 2S lipo cars.
I just ordered the second one. I've made the maiden run of my first one that arrived last Thursday. I worked flawlessly with my Tamiya sport tunned motor on my Sakura f109. I juiced three three 5000mah (25c 40c and 50c) lipo packs back to back on an asphalt track with a 86/26 ratio and it didn't break a sweat. it wasn't even warm during the entire run. I have got it because of the cut off and it worked just fine. I definitely recommend it as a go to brushed esc to any rwd and 2S lipo cars.
I just ordered the second one. I've made the maiden run of my first one that arrived last Thursday. I worked flawlessly with my Tamiya sport tunned motor on my Sakura f109. I juiced three three 5000mah (25c 40c and 50c) lipo packs back to back on an asphalt track with a 86/26 ratio and it didn't break a sweat. it wasn't even warm during the entire run. I have got it because of the cut off and it worked just fine. I definitely recommend it as a go to brushed esc to any rwd and 2S lipo cars.
Ma rendben megérkezett a termék!
Eddig rendben van minden igaz az alján a forrasztásnál mintha kis oxidáció lenne de ez remélem nem befojásolja majd a működését.
Kioróbálás után már többet tudok mondani.
Köszönöm Banggood!
Today the product arrived in order!
So far, it's all right, true at the bottom of the soldering, it's like a little oxidation, but I hope it doesn't interfere with its operation.
I can tell you more after I've been yelled.
Thank you, Banggood!
Today the product arrived in order!
So far, it's all right, true at the bottom of the soldering, it's like a little oxidation, but I hope it doesn't interfere with its operation.
I can tell you more after I've been yelled.
Thank you, Banggood!
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-30 of 73|
Show Original
A part of the QA has been auto-translated.
0
Q:
Hi! I want to use this ESC with a high torque 500 RPM motor with a 12V LiPo battery. will it work?? i am scared that this ESC won't be able to handle a high torque motor with a 12 Volt battery and will heat up. Pls respond. I have given a link for the motor below.
https://www.amazon.in/Robodo-Electronics-ROBO_2-Johnson-Robotics/dp/B00N4O9B5O/ref=mp_s_a_1_1?ie=UTF8&qid=1537038443&sr=8-1&pi=AC_SX118_SY170_FMwebp_QL65&keywords=12v+500+rpm&dpPl=1&dpID=415or1u8k0L&ref=plSrch
Hi! I want to use this ESC with a high torque 500 RPM motor with a 12V LiPo battery. will it work?? i am scared that this ESC won't be able to handle a high torque motor with a 12 Volt battery and will heat up. Pls respond. I have given a link for the motor below.
https://www.amazon.in/Robodo-Electronics-ROBO_2-Johnson-Robotics/dp/B00N4O9B5O/ref=mp_s_a_1_1?ie=UTF8&qid=1537038443&sr=8-1&pi=AC_SX118_SY170_FMwebp_QL65&keywords=12v+500+rpm&dpPl=1&dpID=415or1u8k0L&ref=plSrch
I have 3 of these and, by personal experience, I can report the cutoff (when the esc is properly set for LIPO batteries) hits in when lipo 2S gets as low as 7.4v. I have seen people say it does not have a cutoff because they are used to brushless escs cutting off with 3.4v per cell or because this esc cuts off long after the low voltage alarm would start to buzz. As a way of precaution, I would install a low voltage buzzer.
I have 3 of these and, by personal experience, I can report the cutoff (when the esc is properly set for LIPO batteries) hits in when lipo 2S gets as low as 7.4v. I have seen people say it does not have a cutoff because they are used to brushless escs cutting off with 3.4v per cell or because this esc cuts off long after the low voltage alarm would start to buzz. As a way of precaution, I would install a low voltage buzzer.
Answered by Macieira on 29/07/2019Helpful (0)
0
Q:
what if I used 3s but 12.1v or 15.1v. it is ok for this esc..?
what if I used 3s but 12.1v or 15.1v. it is ok for this esc..?
how many people don't know that 3*4.2 is 12.6?? apparently most of em.
how many people don't know that 3*4.2 is 12.6?? apparently most of em.
Answered by Matt Walsh on 25/10/2021Helpful (0)
0
Q:
The description says that the ESC is waterproof but what about the ON/OFF switch? Is it waterproof as well because it doesn't look waterproof in the pictures.
The description says that the ESC is waterproof but what about the ON/OFF switch? Is it waterproof as well because it doesn't look waterproof in the pictures.
One of my 2 ESCs has got confused, the mode switch has no effect now and there is no reverse. I need to do a reset. How do I do this? They didn't come with a manual. Thanks.
One of my 2 ESCs has got confused, the mode switch has no effect now and there is no reverse. I need to do a reset. How do I do this? They didn't come with a manual. Thanks.
Das kann ich Ihnen nicht sagen Wenden Sie sich an den Kundendienst
I can't tell you. Contact Customer Support
Answered by BG115753439 on 26/10/2021Helpful (0)
0
Q:
Will this ESC support 3S lipo running a 540 stock motor from the WLToys 12428? I am aware that a new receiver and servo is needed which i already have. Just need an ESC able to handle my 3S batteries
Will this ESC support 3S lipo running a 540 stock motor from the WLToys 12428? I am aware that a new receiver and servo is needed which i already have. Just need an ESC able to handle my 3S batteries
I have the same problem, I just buy and unpacked the esc and the accelerator don’t work, i unplugged and try with other receptor and work well maybe you can try another receptor and RC remote
I have the same problem, I just buy and unpacked the esc and the accelerator don’t work, i unplugged and try with other receptor and work well maybe you can try another receptor and RC remote
Answered by Joaquin_a on 03/11/2021Helpful (0)
0
Q:
is this plug and play with WLToys144001 ALL stock? is it compatible with it's transmitter too? sorry. new to this.
is this plug and play with WLToys144001 ALL stock? is it compatible with it's transmitter too? sorry. new to this.
I don't believe it will the receiver for the Wltoys 144001 is a 3-in-1 combo so you'd need a different servo, receiver, and controller. Sorry to be the bearer of bad news.
I don't believe it will the receiver for the Wltoys 144001 is a 3-in-1 combo so you'd need a different servo, receiver, and controller. Sorry to be the bearer of bad news.
Answered by BG234817393 on 08/08/2020Helpful (0)
0
Q:
In the product image and description rating is given as 320A but product delivered has 60A.
In the product image and description rating is given as 320A but product delivered has 60A.