* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Ирсоли стандартии ройгон барои фармоишҳо аз $9.9 зиёд
Сиёсати Бозгашт
Тӯҳфаҳои баргардонидашуда то 40 рӯз пас аз гирифтани мол қабул карда мешаванд. Тӯҳфаҳои фардӣ наметавонанд баргардонида ё иваз карда шаванд. Тӯҳфаҳое, ки бо корти тӯҳфаи электронӣ харида шудаанд, танҳо иваз карда мешаванд; бозгаштҳо қабул намешаванд.
Тӯҳфаи Ройгон
Хуш омадед ба Roymall, сомонаи касбии шумо барои харидани тӯҳфаҳои баландсифати мағозаҳои департаментӣ. Мо дастгирии шуморо қадр карда, бо илова кардани як лаҳзаи иловагии шавқ ба харидҳои шумо, миннатдорӣ худро ифода мекунем. Вақте ки бо мо харид мекунед, шумо на танҳо аз маҳсулоти баландсифат, ки ҳаёти шуморо беҳтар мекунанд, баҳра мебаред, балки ҳар як фармоиш бо як тӯҳфаи ройгони махсус меояд. Омодаед, ки коллексияи моро омӯхта ва тӯҳфаҳои комили худро пайдо кунед? Маҳсулоти баландсифати мағозаҳои департаменти моро тафтиш кунед, фармоиши худро гузоред ва интизори шавқи тӯҳфаи ройгони худ бо хариди худ бошед.
Сиёсати Ирсол
Мо баъд аз гирифтани фармоишҳои шумо барои ирсоли мол ба шумо мекошем ва онҳоро бо амният мерасонем. Тафсилоти ирсол дар почтаи электронии тасдиқии шумо дода мешавад.Дар аксари ҳолатҳо, фармоишҳо дар давоми 2 рӯз коркард карда мешаванд.Дар ҳолатҳои махсус, онҳо ба таври зерин ба таъхир меафтанд: Вақте ки шумо дар рӯзи шанбе, якшанбе ё идҳо фармоиш медиҳед, он барои 2 рӯз ба таъхир меафтад..Одатан, 5-7 рӯзи корӣ (аз душанбе то ҷумъа) лозим аст, бе он ки бо таъхири парвоз ё омилҳои дигари муҳит таъсир кунад..Азбаски хидмати ирсоли мо дар саросари ҷаҳон аст, вақти ирсол вобаста ба ҷойгиршавии шумо хоҳад буд, бинобар ин, агар шумо дар ноҳияҳо ё кишварҳои дур ҳастед, шояд чанд бор лозим ояд ва лутфан бо сабр интизор шавед.
1. Сиёсати Бозгашт & Иваз
Мо танҳо тӯҳфаҳоеро қабул мекунем, ки аз roymall.com харида шудаанд. Агар шумо аз тақсимкунандагони маҳаллии мо ё аз фурӯшандагони дигар харида бошед, шумо наметавонед онҳоро аз ҷониби мо баргардонед.Тӯҳфаҳои фурӯши ниҳоӣ ё тӯҳфаҳои ройгон барои бозгашт қабул намешаванд.Барои иҷозаи бозгашт, тӯҳфаи шумо бояд истифода нашуда ва дар ҳамон ҳолате бошад, ки шумо онро гирифтаед. Инчунин бояд дар бастабандӣи аслӣ бошад.Пас аз гирифтани дастурҳои бозгашт аз мо, лутфан тӯҳфаҳои бозгаштшудаи худро бастабандӣ кунед ва бастаи худро дар почтаи маҳаллӣ ё дигар корпораҳои интиқолӣ гузоред. Мо тӯҳфаи бозгаштшуда ё ивазшудаи шуморо дар давоми 3-5 рӯзи корӣ пас аз гирифтанаш коркард мекунем. Бозгашт ба таври худкор коркард ва ба усули аслии пардохти шумо ворид карда мешавад.Бозгашт ё иваз қабул карда намешавад, агар маҳсулот бо фармоиш истеҳсол шуда бошад, аз ҷумла андозаи фардӣ, рангҳои фардӣ ё чопҳои фардӣ.Агар ба ёрии бештар ниёз доред, лутфан бо мо тамос гиред. service@roymall.com ё Whatsapp: +8619359849471
2.Сиёсати Бозгашт
Шумо пас аз гирифтани бастаи бозгаштӣ ва тафтиши он, бозгашти пурра ё 100% кредити мағозаро хоҳед гирифт. Бозгашт ба таври худкор коркард ва ба усули аслии пардохти шумо ворид карда мешавад.Лутфан қайд кунед, ки хароҷоти интиқол ва ҳама гуна уҳраҳо ё пардохтҳо бозгашт карда намешаванд. Хароҷоти иловагии интиқол пас аз фиристодани баста бозгашт карда намешаванд. Шумо масъули пардохти ин уҳраҳо ҳастед ва мо наметавонем онҳоро рафъ ё бозгашт кунем, ҳатто агар фармоиш ба мо баргардонида шавад.Пас аз гирифтани тӯҳфаи бозгаштӣ ва тасдиқи он, мо ба шумо почтаи электронӣ мефиристем, то ба шумо хабар диҳем, ки мо тӯҳфаи бозгаштшудаи шуморо гирифтаем. Мо инчунин ба шумо хабар медиҳем, ки бозгашти шумо тасдиқ ё рад карда шудааст.Агар дар бораи раванди бозгашт мушкилӣ доред, лутфан бо мо тамос гиред. service@roymall.com ё Whatsapp: +8619359849471
MAX7219 Microcontroller 4-in-1 Display Dot Matrix Module For
Specifications:
A single module can drive a 8x8 dot matrix common cathode Working voltage: 5V Module size: 12.8 x 3.2 x 1.3 cm (L*W*H) With 64 fixing screw holes, hole diameter: 3mm Module with input and output interfaces, support for cascading multiple modules
Wiring:
1. The left side of the module is the input port, and the right is the output port. 2. Control of a single module, the input port only need to receive CPU. 3. The more a module cascade and input end of the first module is connected with the CPU and input end of the input end of the output end is connected to the second module, output terminal of the second module connected with the three modules, and so on. For example: 51 SCM VCC→5V GND→GND DIN→P2.2 CS →P2.1 CLK→P2.0
Package included:
1 x MAX7219 Dot Matrix Module 1 x 5pin Dupont Cable
I first tried the dotMatrix on the Arduino with the Sprite and Matrix libraries. I got funny results because the column adressing is reversed.
Therefore I switched to the MD_MAX72xx libraries. Make sure to change the define in the MD_MAX72xx. h file to read:
#define USE_FC16_HW 1
I used the MD_Keyswitch library found at https://github.com/MajicDesigns/MD_KeySwitch
and the MD_MAX72xx library found at https://github.com/MajicDesigns/MD_MAX72XX
Then I pulled the source at https://github.com/MajicDesigns/MD_MAX72XX/blob/master/examples/MD_MAX72xx_ScrollChart/MD_MAX72xx_ScrollChart.ino
With that you should be able to get it to work.
If you use pins that are not-SPI standard, make sure to activate the call to MD_MAX72XX with four parameters, and comment out the one with two parameters.
I first tried the dotMatrix on the Arduino with the Sprite and Matrix libraries. I got funny results because the column adressing is reversed.
Therefore I switched to the MD_MAX72xx libraries. Make sure to change the define in the MD_MAX72xx. h file to read:
#define USE_FC16_HW 1
I used the MD_Keyswitch library found at https://github.com/MajicDesigns/MD_KeySwitch
and the MD_MAX72xx library found at https://github.com/MajicDesigns/MD_MAX72XX
Then I pulled the source at https://github.com/MajicDesigns/MD_MAX72XX/blob/master/examples/MD_MAX72xx_ScrollChart/MD_MAX72xx_ScrollChart.ino
With that you should be able to get it to work.
If you use pins that are not-SPI standard, make sure to activate the call to MD_MAX72XX with four parameters, and comment out the one with two parameters.
I first tried the dotMatrix on the Arduino with the Sprite and Matrix libraries. I got funny results because the column adressing is reversed.
Therefore I switched to the MD_MAX72xx libraries. Make sure to change the define in the MD_MAX72xx. h file to read:
#define USE_FC16_HW 1
I used the MD_Keyswitch library found at https://github.com/MajicDesigns/MD_KeySwitch
and the MD_MAX72xx library found at https://github.com/MajicDesigns/MD_MAX72XX
Then I pulled the source at https://github.com/MajicDesigns/MD_MAX72XX/blob/master/examples/MD_MAX72xx_ScrollChart/MD_MAX72xx_ScrollChart.ino
With that you should be able to get it to work.
If you use pins that are not-SPI standard, make sure to activate the call to MD_MAX72XX with four parameters, and comment out the one with two parameters.
very good product and good price.
If you don't know how that work i found one good tutorial.
https://www.makerguides.com/max7219-led-dot-matrix-display-arduino-tutorial/
If you try the programs and see that they do not work with the first one.
Try changing the names of the pins you will use and reload the program on Arduino.
e.g.
CS_PIN 10
DATAPIN 11
CLK_PIN 13
very good product and good price.
If you don't know how that work i found one good tutorial.
https://www.makerguides.com/max7219-led-dot-matrix-display-arduino-tutorial/
If you try the programs and see that they do not work with the first one.
Try changing the names of the pins you will use and reload the program on Arduino.
e.g.
CS_PIN 10
DATAPIN 11
CLK_PIN 13
very good product and good price.
If you don't know how that work i found one good tutorial.
https://www.makerguides.com/max7219-led-dot-matrix-display-arduino-tutorial/
If you try the programs and see that they do not work with the first one.
Try changing the names of the pins you will use and reload the program on Arduino.
e.g.
CS_PIN 10
DATAPIN 11
CLK_PIN 13
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
@***** look it up in the MAX7219 datasheet. Another cool thing about these ICs is the need for just one resistor to limit the current for all segments x digits (64 per IC) to retain the same brightness whether only one LED is on or all 64. IIRC there's a chart there with recommended resistor values depending on number of LEDs. I could probably lift one of the 8x8 matrices off and see what resistor value they've used, but the datasheet should give you an idea. Assume you need an external power supply though. They're not super bright but it's still 256 LEDs.
@***** look it up in the MAX7219 datasheet. Another cool thing about these ICs is the need for just one resistor to limit the current for all segments x digits (64 per IC) to retain the same brightness whether only one LED is on or all 64. IIRC there's a chart there with recommended resistor values depending on number of LEDs. I could probably lift one of the 8x8 matrices off and see what resistor value they've used, but the datasheet should give you an idea. Assume you need an external power supply though. They're not super bright but it's still 256 LEDs.
Answered by BG344213471 on 31/08/2022Helpful (0)
0
Q:
Can I daisy chain several of these? By just connecting output of the first with input of the next?
Can I daisy chain several of these? By just connecting output of the first with input of the next?
Depending on how much you want to daisy chain you should inject supply power every 2 or 3 modules else the voltage drop and the current running through the modules gets to high
Depending on how much you want to daisy chain you should inject supply power every 2 or 3 modules else the voltage drop and the current running through the modules gets to high
Depends on what you mean by "users manual". The datasheet for the MAX7219 controller is excellent and all you need to know to program these things. If you want plug and play there are multiple libraries to choose from.
Depends on what you mean by "users manual". The datasheet for the MAX7219 controller is excellent and all you need to know to program these things. If you want plug and play there are multiple libraries to choose from.
Answered by BG344213471 on 31/08/2022Helpful (0)
0
Q:
I can choose the color of the matrix or only send it in a single color?
I can choose the color of the matrix or only send it in a single color?
Use the MD_MAX72XX library. With the device set to: #define HARDWARE_TYPE MD_MAX72XX::ICSTATION_HW. If you don't change that line in the examples, the characters are mirrored. Use the MD_Parola library (also) for even more functions. All sketches have to include that line, the default is Parola hardware.
Use the MD_MAX72XX library. With the device set to: #define HARDWARE_TYPE MD_MAX72XX::ICSTATION_HW. If you don't change that line in the examples, the characters are mirrored. Use the MD_Parola library (also) for even more functions. All sketches have to include that line, the default is Parola hardware.
Answered by Strider on 28/11/2018Helpful (0)
Ask a Question
1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.