* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Ирсоли стандартии ройгон барои фармоишҳо аз $9.9 зиёд
Сиёсати Бозгашт
Тӯҳфаҳои баргардонидашуда то 40 рӯз пас аз гирифтани мол қабул карда мешаванд. Тӯҳфаҳои фардӣ наметавонанд баргардонида ё иваз карда шаванд. Тӯҳфаҳое, ки бо корти тӯҳфаи электронӣ харида шудаанд, танҳо иваз карда мешаванд; бозгаштҳо қабул намешаванд.
Тӯҳфаи Ройгон
Хуш омадед ба Roymall, сомонаи касбии шумо барои харидани тӯҳфаҳои баландсифати мағозаҳои департаментӣ. Мо дастгирии шуморо қадр карда, бо илова кардани як лаҳзаи иловагии шавқ ба харидҳои шумо, миннатдорӣ худро ифода мекунем. Вақте ки бо мо харид мекунед, шумо на танҳо аз маҳсулоти баландсифат, ки ҳаёти шуморо беҳтар мекунанд, баҳра мебаред, балки ҳар як фармоиш бо як тӯҳфаи ройгони махсус меояд. Омодаед, ки коллексияи моро омӯхта ва тӯҳфаҳои комили худро пайдо кунед? Маҳсулоти баландсифати мағозаҳои департаменти моро тафтиш кунед, фармоиши худро гузоред ва интизори шавқи тӯҳфаи ройгони худ бо хариди худ бошед.
Сиёсати Ирсол
Мо баъд аз гирифтани фармоишҳои шумо барои ирсоли мол ба шумо мекошем ва онҳоро бо амният мерасонем. Тафсилоти ирсол дар почтаи электронии тасдиқии шумо дода мешавад.Дар аксари ҳолатҳо, фармоишҳо дар давоми 2 рӯз коркард карда мешаванд.Дар ҳолатҳои махсус, онҳо ба таври зерин ба таъхир меафтанд: Вақте ки шумо дар рӯзи шанбе, якшанбе ё идҳо фармоиш медиҳед, он барои 2 рӯз ба таъхир меафтад..Одатан, 5-7 рӯзи корӣ (аз душанбе то ҷумъа) лозим аст, бе он ки бо таъхири парвоз ё омилҳои дигари муҳит таъсир кунад..Азбаски хидмати ирсоли мо дар саросари ҷаҳон аст, вақти ирсол вобаста ба ҷойгиршавии шумо хоҳад буд, бинобар ин, агар шумо дар ноҳияҳо ё кишварҳои дур ҳастед, шояд чанд бор лозим ояд ва лутфан бо сабр интизор шавед.
1. Сиёсати Бозгашт & Иваз
Мо танҳо тӯҳфаҳоеро қабул мекунем, ки аз roymall.com харида шудаанд. Агар шумо аз тақсимкунандагони маҳаллии мо ё аз фурӯшандагони дигар харида бошед, шумо наметавонед онҳоро аз ҷониби мо баргардонед.Тӯҳфаҳои фурӯши ниҳоӣ ё тӯҳфаҳои ройгон барои бозгашт қабул намешаванд.Барои иҷозаи бозгашт, тӯҳфаи шумо бояд истифода нашуда ва дар ҳамон ҳолате бошад, ки шумо онро гирифтаед. Инчунин бояд дар бастабандӣи аслӣ бошад.Пас аз гирифтани дастурҳои бозгашт аз мо, лутфан тӯҳфаҳои бозгаштшудаи худро бастабандӣ кунед ва бастаи худро дар почтаи маҳаллӣ ё дигар корпораҳои интиқолӣ гузоред. Мо тӯҳфаи бозгаштшуда ё ивазшудаи шуморо дар давоми 3-5 рӯзи корӣ пас аз гирифтанаш коркард мекунем. Бозгашт ба таври худкор коркард ва ба усули аслии пардохти шумо ворид карда мешавад.Бозгашт ё иваз қабул карда намешавад, агар маҳсулот бо фармоиш истеҳсол шуда бошад, аз ҷумла андозаи фардӣ, рангҳои фардӣ ё чопҳои фардӣ.Агар ба ёрии бештар ниёз доред, лутфан бо мо тамос гиред. service@roymall.com ё Whatsapp: +8619359849471
2.Сиёсати Бозгашт
Шумо пас аз гирифтани бастаи бозгаштӣ ва тафтиши он, бозгашти пурра ё 100% кредити мағозаро хоҳед гирифт. Бозгашт ба таври худкор коркард ва ба усули аслии пардохти шумо ворид карда мешавад.Лутфан қайд кунед, ки хароҷоти интиқол ва ҳама гуна уҳраҳо ё пардохтҳо бозгашт карда намешаванд. Хароҷоти иловагии интиқол пас аз фиристодани баста бозгашт карда намешаванд. Шумо масъули пардохти ин уҳраҳо ҳастед ва мо наметавонем онҳоро рафъ ё бозгашт кунем, ҳатто агар фармоиш ба мо баргардонида шавад.Пас аз гирифтани тӯҳфаи бозгаштӣ ва тасдиқи он, мо ба шумо почтаи электронӣ мефиристем, то ба шумо хабар диҳем, ки мо тӯҳфаи бозгаштшудаи шуморо гирифтаем. Мо инчунин ба шумо хабар медиҳем, ки бозгашти шумо тасдиқ ё рад карда шудааст.Агар дар бораи раванди бозгашт мушкилӣ доред, лутфан бо мо тамос гиред. service@roymall.com ё Whatsapp: +8619359849471
Brand Story
Eachine has solidified its reputation as a leading contender in the FPV sector, celebrated for its innovative spirit and its track record of offering top-tier products at budget-friendly prices. The TX06 FPV camera, thoughtfully engineered with the user"s experience at its core, promises superior performance across diverse flight scenarios, be it leisurely soaring or intense racing.
Feature
- OSD via FC Uart: Configure On-Screen Display (OSD) settings through FC Uart for customized flight data visualization.
- Compact & Lightweight: Ultra-small form factor and lightweight design minimize payload impact on FPV setups.
- 700TVL High-Res & Low Power: Delivers clear 700TVL video quality while maintaining low power consumption for extended flight durations.
-48CH Channels Diversity: Offers 48 channels to optimize signal transmission and minimize interference.
- 1S LiPo Battery Powered: Operated by a single 1S LiPo battery for simplified power management and quick swaps.
- Plug-and-Play Design: User-friendly plug-and-play setup ideal for DIY integration and customization.
- All-in-One FPV Solution: Includes a 5.8GHz 48CH FPV transmitter, 700TVL camera, brass dipole antenna, and OSD functionality for a complete FPV experience.
La verdad no esta mal, la calidad de imagen esta muy bien, para una camara de este tamaño y este precio . La he probado en el coche y tienes diversión para rato. Un punto a su favor es que incluye el emisor en muy poco espacio y muy ligera. Merece la pena para empezar a iniciarse en el mundo del FPV.
The truth is not bad, the image quality is very good, for a camera this size and this price . I've tried it in the car and you have fun for a while. One point in its favor is that it includes the transmitter in very little space and very light. It is worthwhile to start getting started in the world of VET.
The truth is not bad, the image quality is very good, for a camera this size and this price . I've tried it in the car and you have fun for a while. One point in its favor is that it includes the transmitter in very little space and very light. It is worthwhile to start getting started in the world of VET.
Good little Camera.
If you want to use it seperately you can 3D print housings from thingiverse. You need to make a 1S Adapter for the eachine batteries depending on which ones you use.
You can also trim off the excess cables to make it more compact. In that case you need to solder the top two connectors together to have a video signal like shown in the attached pictures below.
Cheers and have fun.
Stefan from Germany
Good little Camera.
If you want to use it seperately you can 3D print housings from thingiverse. You need to make a 1S Adapter for the eachine batteries depending on which ones you use.
You can also trim off the excess cables to make it more compact. In that case you need to solder the top two connectors together to have a video signal like shown in the attached pictures below.
Cheers and have fun.
Stefan from Germany
Good little Camera.
If you want to use it seperately you can 3D print housings from thingiverse. You need to make a 1S Adapter for the eachine batteries depending on which ones you use.
You can also trim off the excess cables to make it more compact. In that case you need to solder the top two connectors together to have a video signal like shown in the attached pictures below.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
Hi! It may be fine. VTXs in general produce a lot of heat. But tinier ones for the same transmitting power will be hoter. I've already ordered different models from other brands, and they also produce a tone of heat to, especialy when the drone isn't flying. Hope it can help :)
Hi! It may be fine. VTXs in general produce a lot of heat. But tinier ones for the same transmitting power will be hoter. I've already ordered different models from other brands, and they also produce a tone of heat to, especialy when the drone isn't flying. Hope it can help :)
Answered by Aurelien on 02/08/2019Helpful (0)
0
Q:
What are the 4 wires? Can we get some labels on them?
What are the 4 wires? Can we get some labels on them?
the white one is video in, the yellow is vid out, the black is ground and green is smart audio. i placed video in (white)to the video out of flight controller, then video out (yellow) to video in on the FC. I couldn't be bothered with smart audio, i could mow the lawn and get a better experience, but some FCs have a dedicated smart audio pad you can solder to. As for the black gnd, I didn't use as there is another gnd with red positive wire on the other side of camera which i connected to the 5V and GND of Flight controller. Nice tiny camera, don't know about its WDR though. Also you can't just cut the wires off as the video in and video out of the camera are looped together at the connector allowing the video feed from the camera(video out) to go to(video in) of the transmitter on the back of the camera so you can use it all by its self as an 'all in one' (AIO ) camera without OSD
the white one is video in, the yellow is vid out, the black is ground and green is smart audio. i placed video in (white)to the video out of flight controller, then video out (yellow) to video in on the FC. I couldn't be bothered with smart audio, i could mow the lawn and get a better experience, but some FCs have a dedicated smart audio pad you can solder to. As for the black gnd, I didn't use as there is another gnd with red positive wire on the other side of camera which i connected to the 5V and GND of Flight controller. Nice tiny camera, don't know about its WDR though. Also you can't just cut the wires off as the video in and video out of the camera are looped together at the connector allowing the video feed from the camera(video out) to go to(video in) of the transmitter on the back of the camera so you can use it all by its self as an 'all in one' (AIO ) camera without OSD
Very unlikely all three are defective. Therefore check receiver antenna, next take to 6.9m away and retune sometimes tuning close to receiver receiver gets locked to signal that's just off frequency so you only see effect as you move away, check voltage to receiver and camera in case too low, final check in a different area as sometimes another signal from equipment near by (not necessarily rc equipment) can be stamping on the signals between model and receiver.
Very unlikely all three are defective. Therefore check receiver antenna, next take to 6.9m away and retune sometimes tuning close to receiver receiver gets locked to signal that's just off frequency so you only see effect as you move away, check voltage to receiver and camera in case too low, final check in a different area as sometimes another signal from equipment near by (not necessarily rc equipment) can be stamping on the signals between model and receiver.
what's the recommended battery and or name brand battery to fit this camera because i have one and it don't come with the battery. The packaging don't even suggest it.
what's the recommended battery and or name brand battery to fit this camera because i have one and it don't come with the battery. The packaging don't even suggest it.
Hey
Maybe one of you guys can help me.
I wanna make like a bodycam / hat cam for when im target shooting.
I did use a cheap generic camera "go pro" and video is awful aspecialy when shooting.
And i thought to myself a drone camera is use to faster speeds.
Would you recommend to try this fpv camera and what should i buy with?
Battery? Storage?
Or where does the recording go from this camera
Hey
Maybe one of you guys can help me.
I wanna make like a bodycam / hat cam for when im target shooting.
I did use a cheap generic camera "go pro" and video is awful aspecialy when shooting.
And i thought to myself a drone camera is use to faster speeds.
Would you recommend to try this fpv camera and what should i buy with?
Battery? Storage?
Or where does the recording go from this camera
If a generic go pro was unacceptable this would also be unacceptable.
This is a camera and video transmitter. Meaning it requires a battery to power it. It would also then need a receiver to receive the video transmission that also had a DVR to record. This might be goggles, a monitor or a receiver attached to a laptop or PC.
This is not a budget or quality solution for what you want.
If a generic go pro was unacceptable this would also be unacceptable.
This is a camera and video transmitter. Meaning it requires a battery to power it. It would also then need a receiver to receive the video transmission that also had a DVR to record. This might be goggles, a monitor or a receiver attached to a laptop or PC.
This is not a budget or quality solution for what you want.
Answered by BG502556513 on 13/07/2023Helpful (0)
0
Q:
Can I connect this camera with a television to watch live video?
Can I connect this camera with a television to watch live video?
I dont think this camera has the option to flip the image upside down. Some of the nicer caddx, runcam, and foxeer cameras have that feature, but this one does not seem to support that.
I dont think this camera has the option to flip the image upside down. Some of the nicer caddx, runcam, and foxeer cameras have that feature, but this one does not seem to support that.
NO, NO, NO - smart audio does NOT in any way relate to audio or microphones. Smart Audio in the context of FPV cameras is a name given to the ability to be able to open up a camera settings menu by using the sticks on your controller (transmitter) when NOT armed hold sticks at centre throttle, yaw left and pitch forwards at the same time this opens up an on screen settings display - please look. up how to do this and familiarise yourself with the system before telling people that smart audio relates to sound - it doesn't!
NO, NO, NO - smart audio does NOT in any way relate to audio or microphones. Smart Audio in the context of FPV cameras is a name given to the ability to be able to open up a camera settings menu by using the sticks on your controller (transmitter) when NOT armed hold sticks at centre throttle, yaw left and pitch forwards at the same time this opens up an on screen settings display - please look. up how to do this and familiarise yourself with the system before telling people that smart audio relates to sound - it doesn't!
ithink you definitely can. this transmit video (only add a battery ofc) and doesn't need anything more. The one you might want is the simpler with only 2 wires (red and black), this one has 3 wires for connecting to a flight controller (optional) to use it standalone, connect video-out and video-in wires together
ithink you definitely can. this transmit video (only add a battery ofc) and doesn't need anything more. The one you might want is the simpler with only 2 wires (red and black), this one has 3 wires for connecting to a flight controller (optional) to use it standalone, connect video-out and video-in wires together
Answered by dtrinciarelli on 21/10/2022Helpful (0)
0
Q:
Is that camera compatible with eachine drone e026h? Thank you
essa câmera é compatível com drone eachine e026h? obrigado
Did you maybe cut off the connector for the OSD input? There is a loop wire connecting 2 pins in there -so if you remove the connector, you will separate the transmitter from the camera --> no picture
Did you maybe cut off the connector for the OSD input? There is a loop wire connecting 2 pins in there -so if you remove the connector, you will separate the transmitter from the camera --> no picture
Answered by acanthurus on 04/02/2021Helpful (0)
Ask a Question
1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.